Services
Rain Gutters
Gutter Guards
Our Rain Gutter Services
01.
Measure
When our crew arrives, we announce our presence to homeowner then measure the runs outlined on the project drawing exactly to ensure a snug custom fit for your homes' new gutters
02.
Manufacture
Once measurements are checked the crew custom manufactures gutters onsite from coil stock to your homes exact measurements. Endcaps, sealant and hangers are added
03.
Installation
Installation starts with the longest runs being set in place first, then downspouts, corner miters and sealant are added. After clean up and a final check the project is complete
Gutter Guards
There are five general categories of gutter guards and one is sure to be right for your home, but which one? Review our descriptions to find the right solution for you.
- Mesh Screens
- Gutter Inserts
- Flat Decks
- Shields / Helmets
- Micro Screens
Mesh Screens are available in a wide variety of materials and finishes at home stores and are generally installed by homeowners.
They often have a high spot or bulge in the screen trapping debris against the fascia and roof line. A second common issue is when one side of the screen is installed under the leading edge of shingles. Tampering with an original shingle roof installation may void a roof warranty and may lead to water intrusion under the shingles.
My experience of this type of screen is that it’s best suited to keeping tennis balls out of your gutter
Gutter Inserts are available at home stores and are generally installed by homeowners.
When installed they fill the area normally occupied by water reducing the gutters carrying capacity.
Over time they will trap any debris that enters the gutter and as such are designed as a temporary solution which require maintenance – removal, cleaning and or replacement normally after about 6 months of use. This is exactly what most homeowners are seeking to avoid.
Flat Decks fall right in the middle of most gutter protection offerings in my opinion when it comes to value and utility. They are commercial products usually installed by trades people.
My experience is that flat deck gutter guards can reduce the maintenance needs for most homeowners. The typical maintenance routine is check and clean as necessary, usually every 6 months or so. Cleaning is done by blowing off any accumulated organic debris.
The flat deck design makes this a breeze (excuse the pun) as they typically have a smooth finish which is easy to clean and does a better job than screen mesh at resisting organic matter buildup.
Shield or Helmet style gutter guards cover the gutter with a solid surface and rely upon surface tension to have the water roll around a curve or series of curves to enter the gutter while displacing any debris in the process.
There are products that incorporate the gutter and shield/helmet in one component piece. Many other options are designed as an after market product that will fit over existing gutters
This style guard is often attached directly to the roof under the leading edge of shingles.
Micro Screens are the latest technology and some are among the highest end products generally available on the market. They are typically a chassis made of vinyl or aluminum with a fine mesh screen stretched across this chassis.
These types of guards are often installed at a pitch to encourage organic debris to self evacuate. In my experience, results with these systems vary, in some cases being essentially maintenance free. In other cases, especially in a shaded environment these mesh systems can clog, thus prohibiting the rainwater from entering the gutter as designed but instead flowing over the side(s) of the gutter.
Although the gutters themselves remain clog free, in this scenario they will begin to fail and continue to deteriorate until repaired or replaced.
Within these five broad categories of gutter guard systems, there are dozens if not hundreds of branded products available, I would encourage any homeowner to consider their homes’ own unique environment, for example: Does your home have harsh snowy winters or are you in Florida with no ice but plenty of heavy rain? Is your home shaded by trees or exposed to the elements? Is your home on the coast or Inland? These can all have a bearing on what’s the right solution for your home. Please contact us with any questions
Our Working Process
Consultation
Gutter for Life evaluates the need and possible solutions based upon the specific projects’ needs.
Proposal
Gutter for Life creates a custom quote at no cost to homeowners for their specific project.
Installation
Installation is carried out by our expert crews at a time convenient for homeowner
Inspection
Upon completion of installation, the entire job is inspected to ensure customer satisfaction.